TP4056-1A-USBC
1A USB Li-Ion/Li-Po charger module, USBC, 18650 protected function
• Power supply: 5V USB-C
• Output voltage: 4.2V DC (±1.5%) (Li-Ion cell final voltage)
• Maximum charging current: 1000mA (at RPROG=1.2kΩ, programmable in the range of 130...1000mA)
• Charging mode: constant current / constant voltage (CC/CV), with automatic shutdown at C/10 ratio
• Other technical data:
- Automatic recharge the cell voltage s below 4.05V
- Built-in PMOSFET, no external series diode or shunt resistor required
- Charging status indication (G – charging, STDBY – end of charge)
- Thermal protection: ~145°C at chip core temperature, automatic current limitation
• Operating temperature: −40...+85°C
• Note:
- 1 cell only Sui for Li-Ion/Li-Pol batteries, not sui for series-connected cells.
- Cooling is via the PCB g plane.
Extended distributor/manufacturer information (EU Regulation 2023/988)
Trade name: HESTORE Hungary Ltd
Postal address: Cziraki street 26-32, Budapest, H1163
Electronic address: https://www.hestore.hu/
Quantity (pcs):
Unit price excl. VAT
| 1+ |
218 Ft
|
| 5+ |
136 Ft
|
| 10+ |
114 Ft
|
| 20+ |
102 Ft
|
| 50+ |
92,85 Ft
|
* The prices according to your settings are displayed without VAT, that contains your custom discount if available, without shipping costs.
For modify please click

icon on top menu.
| Availability |
Qu. |
| In stock |
> 450 |
| 10-15 workdays |
> 2000 |
Alternatives, similar/substitute products
Also purchased by customers
The following products were ordered by other customers together with the above-mentioned model. Please check the compatibility of the selected products.

ESP32-C3-SUPERMINI
ESP32-C3 Super Mini development board, 4MB Flash, 32-bit RISC-V, 160MHz, 2.4GHz Wi-Fi (802.11 b/g/n), Bluetooth 5

PWR-USB-C-BK
Snap-in UCB Type-C socket with power cable, 10cm, black

MT3608-2A
DC-DC step-up module, 2A, 3...12V DC - 4...28V DC

1 X 18650 W
Battery holder, 1 x 18650, with wire