ESP32-PoE is an IoT WIFI/BLE/Ethernet development board with Power-Over-Ethernet function. PoE is handled by a TPS2375PW or Si3402-B chip, which is IEEE 802.3 compliant, including pre-standard (legacy) PoE support. The PoE chip requires at least 37 V DC to operate properly. The module receives power the Ethernet cable and can be expanded with sensors and actuators. Perfect solution for IOT projects.

components of the ESP32-POE-ISO-IND are sui for use in an industrial temperature range of -40...85°C.

Characteristics
- ESP32-WROOM-32 - WiFi and bluetooth module
- Highly reliable industrial quality: -40...+85°C
- CE-RED and LVD certification
- Low consumption design - 200 uA consumption in deep
- 100 Mb Ethernet interface with IEEE 802.3 PoE support
- 3000V DC galvanic isolation between the PoE Ethernet part and the power circuit of the module
- Micro USB connector for ESP32 programming
- MicroSD card working in 1-bit mode (3 additional GPIOs)
- LiPo battery charger with LiPo battery connector
- Battery charge level monitoring pin on the ADC
- External power supply sense pin on ADC
- DC-DC 2W 5V/400mA
- UEXT connector
- User button
- Reset button
- PCB dimensions: 98 x 28mm